How to Enable IR on Blink XT

This article will show you how to enable the infrared illuminator on Blink XT.  This will allow you to see images from your camera in low light situations.

1. Tap the settings icon (this is the slider icon  located above your cameras thumbnail picture on the main screen) to access its settings.

2. Toward the bottom of this screen, you will see a section called "IR ILLUMINATOR".

3. This is where you'll go to enable and configure the infrared illuminator.

Control: If this is set to Off, the IR illuminator will not turn on.  If it is set to On, the IR illuminator will always turn on.  If it is set to Auto, the IR illuminator will only turn on when low light is detected.

Intensity: Changing the intensity will adjust the contrast of the image.  This value can be set to Low, Medium or High.  Low will make the image darker whereas High will make the image brighter.

Did you find this article helpful?