Mini camera settings

Learn all about our New Blink Device Settings Layout and get familiarized with the new design!

To access the settings for a Mini camera, tap the settings icon  settings icon  located above the right top corner of the thumbnail image on your Home screen.

Click to learn about settings for Blink Outdoor and Indoor (gen 2) cameras.

Device Settings

General Settings
Rename and check the status of your camera.

Motion Settings
Set motion detection and various notifications.

Video and Photo
Access video quality settings and features.

Audio Settings
Modify your audio streaming and volume settings.


General Settings

Camera name that will be displayed on your Home screen. You can edit this name at any time from here or at the Home screen.

Status LED
On a Mini camera you can set when the LED light displays On, Off or Recording.

Last Updated
This button manually updates your camera status.

Camera to Wi-Fi
This section shows the Signal Strength from the last time the camera connected. After moving your camera it is a good idea to return here and ensure you have a good signal strengths.

Change Wi-Fi
Use this option if you need to connect your camera to a different router or reconnect your camera to your existing router to troubleshoot an issue.

Displays your current firmware version.

Delete Camera
This button removes the camera from your Blink system and it will no longer appear on the home screen.


Motion Settings

Enable Motion Detection
This setting must be on for the camera to detect motion. If this setting is off, the camera will not detect motion. Note: Once you enable motion detection, arm your camera to receive Motion Detection notifications and to save motion clips.

Activity Zones
Disables motion detection for selected regions of the camera view to prevent unwanted motion clips or notifications.

Retrigger Time
The length of time from the completion of one motion clip to the start of another. This can be set from 10-60 seconds.

Controls motion sensor sensitivity. Low sensitivity detects larger objects in motion. High sensitivity detects smaller objects. Adjust sensitivity then test by creating motion notifications to achieve the right balance for your needs.

Clip Length
The length of motion clips to be recorded and this can be set between 5 and 30 seconds.

End Clip Early If Motion Stops
If the camera stops detecting motion, the clip will end before the full clip length is reached.

Early Notification
This option sends the notification as soon as motion is detected and before the clip is complete. In the Blink App, tap the notification to be immediately taken to the Live View of that camera.

Motion Recording
When this setting is off, the Mini camera will only send motion notifications without recording clips; however, Live View is still available.


Video and Photo

If set to Off, the illuminator will not turn on. If set to On, the illuminator will always turn on. If set to Auto, the illuminator will only turn on in low light conditions. Blink Mini can be set to On or Auto only.

IR Intensity
This value controls brightness of the IR illuminator. This value can be set to Low, Medium, or High. Adjust to control glare or show more detail.

This allows you to change the video quality of your Blink camera. More information about the different modes can be found here.

Flip Video
This should be enabled when mounting a Mini camera upside down on a ceiling so that the image is rotated right side up.


Audio Settings

Enable Microphone
If enabled, audio will be captured in the Live View and motion clips. If disabled, audio will not be captured.

Speaker Volume
A slider sets the speaker audio level on the camera.


Can’t find what you’re looking for?

Contact Support