Blink bietet ein wetterbeständiges Kabel- und Netzteilpaket mit Schutzart IP-55 an. Der Adapter versorgt die Blink Outdoor oder Indoor (3rd Gen) mit Strom und unterstützt so eine längere Akkulaufzeit. Dieses Kabel ist nicht mit der Outdoor 4-Kamera kompatibel.
Besuchen Sie die Amazon.com-Verkaufsseite für das wetterfeste Stromkabel und den Adapter von Blink .
Hinweis: Die Kamera kann zwar über USB mit Strom versorgt werden, Sie sollten jedoch immer frische Batterien in der Kamera haben, für den Fall, dass der Strom ausfällt oder das Kabel abgezogen wird.
Ein speziell geformter USB-Stecker passt in die Gehäuseöffnung der Kamera. Bei korrekter Installation bieten das Netzteil und Blink Outdoor Camera das ganze Jahr über zuverlässige Funktion.
Einzelheiten
- Wetterbeständig nach IP-55
- Mini USB-Stecker, auf Netzteil
- 5 Volt 1 Ampere Strom am Micro-USB-Stecker
To Install
- Make sure the cable reaches to your camera without being stretched.
- Remove the back cover of your camera. Learn more about removing your back cover.
- The port protector is attached on the inside of the camera case by a strap. Push the silicone port protector into the opening of the camera's back cover, then pull the silicone port protector to remove.
- Ensure the adapter plug and camera case opening are free of debris, dirt, oil or liquid of any kind, and then insert the micro USB end of the plug into the camera. You may feel slight resistance as the silicone is fitting the camera case, however the plug should seat without difficulty. If you feel the need to force the plug to fit, it may not be seating correctly. Please double check if the plug is held with the correct side up.
Notice in the Side View image of the plug, how the plug shape follows the curve of the camera back. You will still see a small gap (about the width of a fingernail) when the plug is inserted fully, this is part of the plug design.
- Once the plug is securely in place, check the fit of your mounting location before connecting the camera to the mount. If the fit is too tight, the USB plug may be pulled from the camera accidentally.
- With the cable attached to the camera, plug the power adapter at the other end into your electrical outlet.
- Check the camera function by taking a thumbnail image or opening a Live View session to be sure you have the camera view you need.
- The USB plug is compatible with Blink accessories. For instance, an opening is molded into the Camera Stand as shown.
USB plug fitting through the camera stand bracket
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK
READ THE FOLLOWING CAREFULLY
- Do not force the adapter into a power outlet.
- Do not expose the adapter or cable to liquids.
- If the adapter or cable appears damaged, stop using it immediately.
- When installed, check if the connectors are being pulled by a tight cable.
- Move the camera if necessary, to prevent the cable from pulling on the connectors and exposing your camera to the elements.
- Check for any signs of malfunction such as smoke, or a burning smell from the adapter, or the camera it is attached to, as this is a sign of a damaged or incompatible power adapter.