So richten Sie Ihr Blink -System ein

Die Einrichtung von Blink ist einfach, aber folgen Sie bitte diesen Schritten der Reihe nach .

Die Installation der Blink -App und der Geräte folgt der gleichen Reihenfolge, unabhängig davon, welches Betriebssystem auf Ihrem Gerät ausgeführt wird. Jetzt fangen wir an!


I. Installieren der Blink App und Erstellen Ihres Kontos
II . Einrichten des Sync-Moduls
III . Kamera(s) hinzufügen

Folgen Sie diesen Links, um mehr über die Verwendung Ihres Blink -Systems , die Montage Ihrer Kamera oder die Platzierung der Kamera zu erfahren.

The most recent version of the Blink app is always available in your app store.

Blink supports most smartphones, tablets, and many Alexa enabled products.

Follow the link or scan the QR code to access the most recent Blink app download.

Blink version 6.19.0*
for iOS 14 and later.

Blink version 6.19.0
for Android v6.0 and later.

Blink version 6.19.0
for Fire OS v7.0 and later.

*If you can't locate the Blink app iOS 6.15.0, please refer to this article: End of Support for Android Version 5 - iOS Versions 12 and 13

To get started with the Blink app, follow the instructions below:

1. Launch the Blink App and tap Create Account at the bottom of the screen.

2. Select your country from the drop-down menu and tap Next.

3. Confirm your region and tap OK.
A region is preselected based on your IP address.

choose region

4. Enter a valid email address, and tap Next.

enter your email address

5. Create a password and tap Create Account.
    The password requirements are listed at the bottom of the screen.

enter your email address

6. Complete the multifactor account verification process.

Enter the PIN from the email we sent you and tap "Verify".

New Account PIN
New Account with Expired PIN

PIN codes are valid for 40 minutes. After one minute, the "Resend PIN Code" option appears.

When you have verified your email address, the app configures your SMS text phone number to send alerts and for account verification.

When you are presented with a Phone number entry screen, tap the Phone number entry line to bring up a keypad.

Select your country code from the menu that is displayed when you tap the flag icon next to the Phone number entry line.

Enter the phone number you wish to use for device verification and tap "Next".


If you prefer to not use SMS, the PIN code can be read to you by an automated Voice call instead.
To choose this option, select "Voice call" and tap "Next".

Note: The SMS text option should only be used with mobile phone lines and will not work with landlines. Blink ONLY uses this number to positively associate your device to the Blink app - to make sure the person making changes is you. Your information is private and will not be used for additional purposes or shared with third parties.

Click to learn why we need your phone number. Contact Customer Service if you don't have a phone number.

At this point, an SMS Text message containing the PIN code is sent to the phone number, and the PIN entry screen is opened for you.

Example SMS Text Message:

Your Blink verification code
is: <123456>

Enter the PIN from the SMS Text message we sent you and tap "Verify".

PIN codes are valid for 40 minutes. After one minute, the "Resend PIN Code" option is presented.

Verify SMS PIN
Verify with PIN

When the verification step is complete, you are prompted to link your new Blink account to your Amazon account, by tapping on the "Link Accounts button". This is an optional step. Click to learn how to link your accounts at a later time.

You also have the option to select "Skip" which will take you to the home screen, without linking your accounts.

enter your email address

Then sign into your existing Amazon account or create a new one if needed. The link is then established between accounts and click Next.

Sie können dann mit dem nächsten Schritt zur Einrichtung Ihres Synchronisierungsmoduls fortfahren.

II. Einrichten des Sync-Moduls
Dank des kabellosen Designs von Blink ist das Sync-Modul der einzige Teil des Systems, der angeschlossen werden muss!

Add a Sync Module and create a system

1. From the home screen, tap the Add Device + icon.

Add Device icon on the Blink app upper right corner

2. The Add Device screen displays your device options.

add camera and device screen of Blink app

3. The serial number is also printed as a QR code. To scan a QR code, the Blink app requires permission to access the camera on your mobile device.

Tap OK to permit the Blink app to scan the QR code, automatically entering the serial number. If you prefer, you can deny access to the camera by tapping Don't Allow and enter the serial number manually.

To learn where the QR code and serial number are, tap the "Help me find my QR code and serial number" link at the bottom of the Scan QR Code screen.

put the QR code into the Blink app viewscreen. You can tap the camera image below to locate the serial number QR code.

4. When the QR code is recognized, you are asked to create a new system by tapping the text entry box and providing a name. Tap "Done" to continue.

Select or create a System

5. The Add Sync Module screen will instruct you to plug in your Sync Module and then wait for the light pattern of blinking blue and steady green.

When you see the pattern on your Sync Module, tap Discover Device.

Ready Sync Module light pattern blinking blue over steady green

Note: If you don't see the blinking blue light pattern, then you may need to reset the sync module. Click for instructions to reset the Sync Module.

6. The Blink app needs to connect to the Sync Module's Wi-Fi network. It is named “BLINK-" followed by four digits from the Sync Module Serial Number.

Tap Join, then you are asked to join your local Wi-Fi network.

join Blink network app dialog

7. The Add Sync Module screen displays 2.4 GHz Wi-Fi networks within range.  The Sync Module stores network information for devices that are added to its system. If you do not see your local Wi-Fi network, tap Refresh List at the bottom of the screen. You can troubleshoot Wi-Fi connections here.

add sync module to Wi-Fi internet

8. When you tap your Wi-Fi network name, you are presented with a password entry field. Ensure that your password is correct before you enter it. Incorrect password is a common cause of difficulty getting started. Tap Join to continue.

add Wi-Fi internet network password

9. When network setup is complete, you are notified on the screen. Tap Done to complete the install process and view the Blink app Welcome screen where you can now add a camera.

Adding sync module steps complete

The system name should appear at the top of the Home screen. You are notified that the Sync Module has been added, the 'cloud' icon shows a green connection line indicating that the Sync Module is communicating with the Blink servers, and you can now tap the plus symbol  +  to add a device.

home screen after system complete

NEW: WiFi issues with setup, disconnections, or quality problems? Try our new WiFi fixing app before contacting support.*

routethis ios app download    routethis ios app download

*You will be asked to provide a code before running the test. Enter in the code "BLNK".

III. Kamera(s) hinzufügen

1. To add a Blink Indoor or Outdoor camera, tap the Plus symbol  +  on the app home screen.

2. Select the Blink wireless camera option.

3. Scan the QR code sticker, found inside the back cover.
Click here for detailed instructions on removing the back cover.

4. When the serial number is recognized, you are shown the camera onboarding screen.

When the setup is complete and you are notified of success, tap Done.

Click here if you receive an error "Unable to Connect to Sync Module" when adding cameras to a system.

If your Blink and Amazon accounts are not already linked, you will be prompted to link your device to your Amazon account, by tapping on the Link Accounts button. This is necessary in order to take full advantage of subscriptions, after the initial trial period expires. You also have the option to select "Skip" which will take you to the home screen, without linking your accounts. Click here to learn how to link your Blink and Amazon accounts another time.

enter your email address

Then sign into your existing Amazon account or create a new one if needed. The link is then established between accounts and click Done to go to the Home screen.

Wenn Sie keine Kamera hinzufügen können, klicken Sie bitte hier , um Schritte zur Fehlerbehebung anzuzeigen.

Nächste Schritte:

When a camera is first installed, its serial number (DSN) is the default camera name, and the thumbnail image is blank. If you want to change the name of your camera or add a thumbnail pic, follow these steps below.

1. From the home page, tap the camera name to change it, enter the new name, then tap OK to save.


2. Tap the thumbnail icon to take a new thumbnail image. The thumbnail remains until you refresh it with this button. The Blink Video Doorbell refreshes the thumbnail image each time the ringer button is pressed.


3. Click to learn more about using the Blink app.

Um weitere Blink Kameras hinzuzufügen, tippen Sie auf Wiederholen Sie die Schritte in Teil III. Kamera(s) hinzufügen


Nachdem Sie alles mit Ihrem Konto verbunden haben, klicken Sie hier, um mehr über die Kameraplatzierung zu erfahren, oder sehen Sie sich unsere Verwendung Ihres Blink -Systems Live View , um eine Einführung in die Verwendung der Blink -App und aller Funktionen Ihres neuen Blink -Systems zu erhalten, z System für Bewegungsalarme und Konfigurieren von Benachrichtigungen auf Ihrem Mobilgerät.

Sie können nicht finden, wonach Sie suchen?

Kontaktieren Sie Support