La configuration de Blink est simple, mais veuillez suivre ces étapes dans l'ordre .
L'installation de l'application et des appareils Blink suit la même séquence quel que soit le système d'exploitation de votre appareil. Commençons maintenant !
Sections de configuration
The most recent version of the Blink app is always available in your app store.
Blink supports most smartphones, tablets, and many Alexa enabled products.
Follow the link or scan the QR code to access the most recent Blink app download.
*If you can't locate the Blink app iOS 6.15.0, please refer to this article: End of Support for Android Version 5 - iOS Versions 12 and 13
To get started with the Blink app, follow the instructions below:
1. Launch the Blink App and tap Create Account at the bottom of the screen.
2. Select your country from the drop-down menu and tap Next.
3. Confirm your region and tap OK.
A region is preselected based on your IP address.
4. Enter a valid email address, and tap Next.
5. Create a password and tap Create Account.
The password requirements are listed at the bottom of the screen.
6. Complete the multifactor account verification process.
Enter the PIN from the email we sent you and tap "Verify".
New Account PIN
New Account with Expired PIN
PIN codes are valid for 40 minutes. After one minute, the "Resend PIN Code" option appears.
When you have verified your email address, the app configures your SMS text phone number to send alerts and for account verification.
When you are presented with a Phone number entry screen, tap the Phone number entry line to bring up a keypad.
Select your country code from the menu that is displayed when you tap the flag icon next to the Phone number entry line.
Enter the phone number you wish to use for device verification and tap "Next".
If you prefer to not use SMS, the PIN code can be read to you by an automated Voice call instead.
To choose this option, select "Voice call" and tap "Next".
Note: The SMS text option should only be used with mobile phone lines and will not work with landlines. Blink ONLY uses this number to positively associate your device to the Blink app - to make sure the person making changes is you. Your information is private and will not be used for additional purposes or shared with third parties.
At this point, an SMS Text message containing the PIN code is sent to the phone number, and the PIN entry screen is opened for you.
Example SMS Text Message:
Enter the PIN from the SMS Text message we sent you and tap "Verify".
PIN codes are valid for 40 minutes. After one minute, the "Resend PIN Code" option is presented.
Verify SMS PIN
Verify with PIN
When the verification step is complete, you are prompted to link your new Blink account to your Amazon account, by tapping on the "Link Accounts button". This is an optional step. Click to learn how to link your accounts at a later time.
You also have the option to select "Skip" which will take you to the home screen, without linking your accounts.
Then sign into your existing Amazon account or create a new one if needed. The link is then established between accounts and click Next.
Vous pourrez alors passer à l'étape suivante de configuration de votre module de synchronisation.
II. Configuration du module de synchronisation
Grâce à la conception sans fil de Blink , le module de synchronisation est la seule partie du système qui devra être branchée !
Add a Sync Module and create a system
1. From the home screen, tap the Add Device + icon.
2. The Add Device screen displays your device options.
3. The serial number is also printed as a QR code. To scan a QR code, the Blink app requires permission to access the camera on your mobile device.
Tap OK to permit the Blink app to scan the QR code, automatically entering the serial number. If you prefer, you can deny access to the camera by tapping Don't Allow and enter the serial number manually.
To learn where the QR code and serial number are, tap the "Help me find my QR code and serial number" link at the bottom of the Scan QR Code screen.
4. When the QR code is recognized, you are asked to create a new system by tapping the text entry box and providing a name. Tap "Done" to continue.
5. The Add Sync Module screen will instruct you to plug in your Sync Module and then wait for the light pattern of blinking blue and steady green.
When you see the pattern on your Sync Module, tap Discover Device.
Note: If you don't see the blinking blue light pattern, then you may need to reset the sync module. Click for instructions to reset the Sync Module.
6. The Blink app needs to connect to the Sync Module's Wi-Fi network. It is named “BLINK-" followed by four digits from the Sync Module Serial Number.
Tap Join, then you are asked to join your local Wi-Fi network.
7. The Add Sync Module screen displays 2.4 GHz Wi-Fi networks within range. The Sync Module stores network information for devices that are added to its system. If you do not see your local Wi-Fi network, tap Refresh List at the bottom of the screen. You can troubleshoot Wi-Fi connections here.
8. When you tap your Wi-Fi network name, you are presented with a password entry field. Ensure that your password is correct before you enter it. Incorrect password is a common cause of difficulty getting started. Tap Join to continue.
9. When network setup is complete, you are notified on the screen. Tap Done to complete the install process and view the Blink app Welcome screen where you can now add a camera.
The system name should appear at the top of the Home screen. You are notified that the Sync Module has been added, the 'cloud' icon shows a green connection line indicating that the Sync Module is communicating with the Blink servers, and you can now tap the plus symbol + to add a device.
*You will be asked to provide a code before running the test. Enter in the code "BLNK".
III. Ajout de caméra(s)
1. To add a Blink Indoor or Outdoor camera, tap the Plus symbol + on the app home screen.
2. Select the Blink wireless camera option.
3. Scan the QR code sticker, found inside the back cover.
Click here for detailed instructions on removing the back cover.
4. When the serial number is recognized, you are shown the camera onboarding screen.
When the setup is complete and you are notified of success, tap Done.
Click here if you receive an error "Unable to Connect to Sync Module" when adding cameras to a system.
If your Blink and Amazon accounts are not already linked, you will be prompted to link your device to your Amazon account, by tapping on the Link Accounts button. This is necessary in order to take full advantage of subscriptions, after the initial trial period expires. You also have the option to select "Skip" which will take you to the home screen, without linking your accounts. Click here to learn how to link your Blink and Amazon accounts another time.
Then sign into your existing Amazon account or create a new one if needed. The link is then established between accounts and click Done to go to the Home screen.
Si vous ne parvenez pas à ajouter une caméra, veuillez cliquer ici pour connaître les étapes de dépannage.
When a camera is first installed, its serial number (DSN) is the default camera name, and the thumbnail image is blank. If you want to change the name of your camera or add a thumbnail pic, follow these steps below.
1. From the home page, tap the camera name to change it, enter the new name, then tap OK to save.
2. Tap the thumbnail icon to take a new thumbnail image. The thumbnail remains until you refresh it with this button. The Blink Video Doorbell refreshes the thumbnail image each time the ringer button is pressed.
3. Click to learn more about using the Blink app.
Pour ajouter d'autres caméras Blink , appuyez sur répéter les étapes de la partie III. Ajout de caméra(s)
Maintenant que vous avez tout connecté à votre compte, cliquez pour en savoir plus sur le placement de la caméra , ou consultez notre utilisation de votre système Blink pour une introduction à l'utilisation de l'application Blink et à toutes les fonctionnalités de votre nouveau système Blink comme l'utilisation de Live View , l'armement de votre système d'alertes de mouvement et la configuration des notifications sur votre appareil mobile.