Camera Placement

Where you place your Blink camera helps you get the view that you want.

Camera View

To observe a place, mount the camera and use the Blink app to test your placement with a new thumbnail, or by entering Live View.

You control night vision features from the Camera Settings screen. To get the best results for low light conditions you adjust brightness of the infrared LED. Learn more about night vision settings here.

Motion detection

Another common use for Blink cameras is to alert you when activity occurs.

To detect motion, the camera is sensitive to the size of an object as it appears in the view. A small animal close to the camera could trigger similar detection as a larger animal farther away, because the appearance of their heat signature is similar. The best range of detection is within 5 to 20 feet (1.5 to 6m) of the camera.

Motion detection is also sensitive to bright flashes like those from automobile reflections, or sunlight coming through tree branches.

If you wish to be alerted to a person arriving on a walkway or path, place the camera so the direction of travel moves across the camera view, rather than towards it. When motion goes toward the camera, the image differences from moment to moment are quite small as compared with motion moving across the camera view.

To be alerted to people, rather than animals, you might place the camera so the view is above the ground high enough to not be triggered by the animal or their tail.

If you are primarily interested in arriving visitors and deliveries, it may be useful to mount the camera looking towards the doorway, so random pedestrians or stray animals are not likely to enter the camera view, triggering a motion alert. Remember that motion across the screen (side to side) is more effective for detection than action moving toward the camera.

Testing Motion Sensitivity

After you set motion sensitivity, it is a good idea to test it. Set motion detection for the camera to "On" and "Arm" the system, then walk into the camera view. Depending on your results, adjust the motion sensitivity setting, or shift the camera view, or adjust the infrared LED brightness.

Learn more about enabling motion detection and arming your system here.

False Alerts

In some cases, sources of sudden, or large temperature change can trigger a motion alert. Some examples to consider are intermittent activation of a heater pilot light, heat vent on an exterior wall, or a location that is exposed to concentrated reflections during certain parts of the day.

To learn more about preventing unwanted motion alerts click here.

Image Quality

In general, avoid placing the camera right next to a flat surface. Flat surfaces reflect light and create glare, which can affect the image in many ways. Glare can also be created by momentary reflections, or a strong source of light aimed at the camera lens.

The appearance of glare can be like fog, ghosting, or a bright area of the image. Glare can also make the background appear darker. Examples of glare:

Moving the camera a short distance away from a reflective surface can make a big difference. Using a Blink Camera Mount or Blink Camera Stand is recommended to lift the camera off of surfaces like a shelf and improve image clarity, as shown below.

In some cases, switching the infra red (IR) light Setting to "Off" can help also. If the area has lighting already, as with a garage door opener, your camera will provide a picture as shown here.

Activity Zones

Blink cameras are able to block off motion detection in certain areas that you set. Below is an image representing areas that were blocked from triggering a motion alert by tree motion, moving tree shadow, or blowing leaves.

To learn more about blocking areas from motion detection, go here.


Privacy Zones

Blink Outdoor and Indoor (gen 2) cameras allow you to set two Privacy Zones that block off ANY sensor detection. Privacy Zones are blocked inside the camera, ensuring imagery from those areas never gets out. Click to learn about Privacy Zones.

Can’t find what you’re looking for?

Contact Support