This article covers three ways to provide continuous power to your compatible Blink devices:
1. Weather-Resistant Power Adapter
Important: The Blink Weather-Resistant Power Adapter is only compatible with 10W power adapters (power bricks). Using a power adapter with a different wattage may result in improper functionality.
A 13ft outdoor-rated cable (IP67) that provides continuous power to your Blink camera from an outlet. For Outdoor cameras, we recommend keeping working batteries installed as a backup. If the camera loses power from the adapter, it will automatically use the installed batteries to continue functioning.
Compatible devices: Blink Arc, Outdoor 2K+, Mini 2K+, Mini 2, and Outdoor 4.
What's in the box
- Weather-Resistant Power Adapter with 13ft cable
- 4 screws and anchors
- 4 cable clips
Installation
- Mount the adapter to a flat surface near an outdoor power outlet using the included screws and anchors.
- Secure the cable along its route with the included cable clips.
- Connect your camera.
Note: Mount and secure the cable before connecting your camera. Do not let a powered camera hang by its cable.
The Blink Weather-Resistant Power Adapter is available through Amazon's regional websites and official Blink retailers.
2. Blink Plug-In Adapter
A 24V DC power adapter that powers your Blink doorbell from any standard indoor outlet. No existing doorbell wiring is needed. The adapter is rated IP20 (designed for dry, indoor environments only); the cable is rated for outdoor installation.
Compatible devices: Blink Wired Doorbell 2K+.
What's in the box
- Blink Plug-In Adapter with region-specific plug (US/CA/MX: 10ft / 3m; UK/EU/ANZ: 20ft / 6m)
- 6 cable clips
Installation
- Choose an indoor outlet near your planned mounting location.
- Route the cable through a wall or window/door gap to the outdoor mounting point.
- Secure the cable with the included clips.
- Connect the cable to your Blink device and plug the adapter into the outlet.
For detailed doorbell installation instructions, visit the setup guide for your Blink Wired Doorbell 2K+.
The Blink Plug-In Adapter is available through Amazon's regional websites and official Blink retailers.
3. USB cable
All Blink cameras have a USB port that accepts a micro USB cable and 5V/1A adapter to reduce battery drain. If USB power is lost, cameras with batteries will automatically switch to battery power. Note: Blink Mini cameras are USB-powered only. A cable and adapter are included in the box.
- Indoor use: When connecting a USB cable, insert the connector firmly into the port until it creates a complete seal. This ensures a secure connection and helps maintain the integrity of the port.
- Outdoor use: Removing the USB port cover from your Blink camera or device eliminates its weather resistance, leaving it vulnerable to moisture and the elements. When connecting a USB cable for outdoor use, insert the connector firmly into the port until it creates a complete seal to maintain weather resistance. Store the silicone USB cover in a safe place in case it's needed later.
To maintain weather protection while providing continuous outdoor power, use a compatible Blink Weather-Resistant Power Adapter.