Getting Started

If you're new to Blink, we're here to help you get started. Begin by downloading the Blink app and creating your account. Once you have completed these steps, you can proceed with setting up your Sync Module XR.

If you are replacing an existing Sync Module with a Sync Module XR, please refer to replacing your existing Sync Module with a Sync Module XR.

Setting up the Sync Module XR

1. Begin by plugging in your Sync Module.
2. From the Home Screen, tap the + icon in the upper right corner.
3. Tap Sync Module.
4. Scan the QR code on the back of the device or tap Enter Serial Manually. Once the serial number is recognized, select an available system to add your Sync Module. If no systems are available or if none exist, create a new one with a unique name, then tap Continue. Learn more about creating and managing systems.
5. Once the Sync Module displays a blinking blue and solid green LED, tap Discover Device. If a different light pattern is displayed, refer to Understanding the LEDs on your Sync Module.
6. You will be prompted to join the temporary Wi-Fi network ‘BLINK-xxxx’ (where ‘xxxx’ is the last four digits of your Sync Module’s serial number). Tap Join / Connect.
7. From the list of available Wi-Fi networks, select your local Wi-Fi network. Enter the Wi-Fi password and tap Join. If your network does not appear, tap Refresh List. After tapping Join, the Sync Module may perform a firmware update, which can take a few moments.
8. Once the Sync Module has been successfully added to your system, a completion screen will appear. Tap Done.

Note: When using multiple Sync Module XRs, place each one in a separate room with at least one wall between them.

If you experience any issues during setup, visit Sync Module Troubleshooting.