Getting started

If you're new to Blink, begin by downloading the Blink app and creating your account. Once you have completed these steps, you can proceed with setting up your Sync Module XR+.

If you are replacing an existing Sync Module with a Sync Module XR+, refer to replacing your existing Sync Module.

Sync Module XR+ is weather-resistant (IP-65 rated) when used with the Blink Outdoor Mounting Kit (includes outdoor-rated power adapter; sold separately) or the Weather-Resistant Power Adapter (sold separately), making it suitable for both indoor and outdoor use. With Extended Range (available only in the United States and Canada), you can place up to ten Outdoor 4 cameras farther from the Sync Module.

Blink Sync Module setup video

In this video, we'll walk you through each step of setting up your Blink Sync Module. To view this video in another language, in the top-right corner of the video, click the Gear icon > Audio Track, and select a language.

Setting up your Sync Module

1. Plug in your Sync Module XR+.
   • Sync Module XR+ is only compatible with 10W power adaptors.
2. From the Home Screen, tap the + icon in the upper-right corner.
3. Tap Sync Module.
4. Scan the QR code on the back of the device or tap Enter Serial Manually, then tap Continue. Once the serial number is recognized, select an available system to add your Sync Module.
   • If no systems are available or if none exist, create a new one with a unique name. Learn more about creating and managing systems.
5. Once the Sync Module displays a blinking blue and solid green LED, tap Discover Device. If a different light pattern is displayed, refer to Understanding the LEDs on your Sync Module.
6. You will be prompted to join the temporary Wi-Fi network 'BLINK-xxxx' (where 'xxxx' is the last four digits of your Sync Module's serial number). Tap Join / Connect.
7. From the list of available Wi-Fi networks, select your local Wi-Fi network. Enter the Wi-Fi password and tap Join. If your network does not appear, tap Refresh List. After tapping Join, the Sync Module may perform a firmware update, which can take a few moments. Do not unplug your Sync Module during this process.
   • Note: You'll have the option to securely save your Wi-Fi password to your Blink account for convenient access later. You can update or delete saved passwords by visiting Settings > Account & Privacy > Saved Passwords.
8. Once the Sync Module has been successfully added to your system, a completion screen will appear. Tap Done.

If you experience any issues during setup, visit Sync Module Troubleshooting.

Mounting your Sync Module XR+

The Blink Outdoor Mounting Kit (sold separately) allows you to mount your Sync Module XR+ outdoors, up to 18.1ft high.

1. From the Home Screen, tap the + icon in the upper-right corner.
2. Tap Blink Outdoor Mounting Kit for Sync Module XR+.
3. When asked if your Sync Module XR+ has already been onboarded to your account, tap It's Been Installedto continue to the mounting steps.
   • If you haven't set up your Sync Module XR+ yet, follow the setup instructions above before mounting.
4. Position the back plate where desired. Use a 1/4" drill bit (masonry bit for brick or stucco). Use 3 screws from Pack A and 3 anchors from Pack B if needed.
   • If mounting on vinyl siding, use the vinyl hooks (Pack E) and vinyl screws (Pack D) to mount the back plate flat.
   
5. Secure the back plate to the wall using 3 screws from Pack A. Do not overtighten. If mounting on vinyl siding, use the screws from Pack D to attach the back plate to the vinyl hooks.
   
6. Insert the USB-C power adapter cable into your Sync Module XR+. Only use the outdoor-rated power adapter that came with your Outdoor Mounting Kit for Sync Module XR+.
   
7. Align the top edge of your Sync Module XR+ to the back plate and slide it down onto the hooks. Twist the bottom of the Sync Module until it clips into the back plate. The Sync Module is now secure.
   
8. Use a Phillips-head screwdriver to tighten the security screw on the bottom of the back plate. This secures the Sync Module XR+ and USB cable. Do not overtighten.
   
9. Position the power adapter where desired and secure it to the wall. Use 4 screws from Pack A and anchors from Pack B as needed. Do not overtighten. To secure loose cable, attach the cable clips from Pack C using 4 screws from Pack A and anchors from Pack B if needed. Plug in to the outlet.