This article explains how to update your Sync Module's Wi-Fi settings in the Blink app.
Updating Wi-Fi on other Blink devices
Don't own a Sync Module? Need to update Wi-Fi for a Blink device that can create its own system? Review these articles:
- How to update your Video Doorbell's Wi-Fi Connection
- How can I update the Wi-Fi settings for my Mini camera?
- How can I update the Wi-Fi settings for my Wired Floodlight camera?
For other Wi-Fi troubleshooting, see our Wi-Fi Information and Troubleshooting Guide.
When you move your Sync Module system to a new location or Wi-Fi network, you will need to set up the Sync Module for its new network. Your Sync Module may stay connected to the same Wi-Fi setup when you move it, but we do not guarantee it will perform. We recommend that you manually update the Wi-Fi settings for the Sync Module's new network.
Before you begin
Use this to caution users about common mistakes or to flag steps in a process that require special attention to avoid potential issues, such as the risk of electrical shock when handling devices like the Wired Floodlight.
Note: Reconfiguring the Sync Module Wi-Fi network will not delete saved clips.
Change a Sync Module's Wi-Fi Network
- From the Home screen, tap on Sync Module and select Change Wi-Fi Network.
- On the change Wi-Fi screen, you will see a blinking blue light above a steady green light.
- Press the Reset button.
- Press until you feel it click, and hold until one LED turns red; then release the button.
- Press until you feel it click, and hold until one LED turns red; then release the button.
- When the lights match a blinking blue and solid green pattern, tap Discover Device when prompted to join the Sync Module's temporary Wi-Fi network. Tap Join, and then select your Wi-Fi network.
- Enter your Wi-Fi password and tap Join.
- After the devices have finished communicating, you’ll receive a message, “Sync Module added to <system name> system!”. Once you receive that message, tap Done.
- Your system is ready to be used as normal.