Updating the Wi-Fi setting for your Sync Module system

This article explains how to update your Sync Module's Wi-Fi settings in the Blink app.

When you move your Sync Module system to a new location or Wi-Fi network, you will need to set up the Sync Module for its new network. Your Sync Module may stay connected to the same Wi-Fi set up when you move it, but performance is not guaranteed. It is recommended that you manually update the Wi-Fi settings for the Sync Module's new network.


Before you begin

This procedure requires direct communication between the mobile app and the Sync Module. Both must be active and on the same Wi-Fi network. To complete this procedure, you must be physically with your system and have your Sync Module plugged in to a power supply.

Note: Saved clips are not deleted when you reconfigure the Sync Module Wi-Fi network.


  1. From the Home sceen, tap on Sync Module and select Change Wi-Fi Network.
  2. On the change Wi-Fi screen, you will see a blinking blue light above a steady green light.
  3. Press the Reset button. 
    • Press until you feel it click, and hold until one of the LEDs turns red; then release the button.
  4. When the lights match a blinking blue and solid green pattern, tap Discover Device and you are asked to join the Sync Module's temporary Wi-Fi network. Tap Join, and then select your Wi-Fi network from the available choices.
    tap Join Wi-Fi Network select your Wi-Fi Network
  5. Enter your Wi-Fi password and tap Join.
  6. After the devices have finished communicating, you’ll receive a message, “Sync Module added to <system name> system!”. Once you receive that message, tap Done.
  7. Your system is ready to be used as normal.

Can’t find what you’re looking for?

Contact Support