Depending on your Blink camera, your device is either powered by AA 1.5 volt lithium non-rechargeable batteries, micro USB cable, USB-C cable, or hardwired to a 100VAC-240VAC 50/60Hz power source.
Batteries
- Battery-powered Blink cameras are designed to be powered by size AA 1.5 volt lithium non-rechargeable batteries.
- These cameras include the Outdoor 4, Video Doorbell, the Outdoor and Indoor (3rd Gen), and older devices such as the XT, XT2, and the Indoor (1st Gen).
USB
- Battery-powered Blink cameras that have a USB port on the back can be powered by a micro USB cable and adapter instead of batteries.
- These cameras include the Outdoor 4, Outdoor and Indoor (3rd Gen), and older devices such as the XT, XT2, and the Indoor (1st Gen). To learn more, visit Powering your Blink camera with a USB.
- Blink Mini cameras are powered by a USB-C cable and do not require batteries.
- For outdoor use, a Blink Weather Resistant Power Adapter is required to power the Mini 2, and can be used for the Outdoor 4 and Outdoor (3rd Gen) cameras.
Hardwired
- The Wired Floodlight Camera requires a 100VAC-240VAC 50/60Hz power source. Learn more about the Wired Floodlight Camera.
- You can wire your Video Doorbell to compatible chime wiring to sound your in-home chime for doorbell button presses; however, your doorbell is always powered by two AA 1.5 volt lithium non-rechargeable batteries. Learn about Blink Video Doorbell wired installation.
Solar power
The Blink Solar Panel Mount uses power from the sun to continuously power the Outdoor (3rd Gen) providing non-stop peace of mind. Flexible placement is provided by the pivoting of the solar panel when attached or detach it and move up to two feet away from your camera.
Solar powering your Blink Outdoor (3rd Gen) gives you a wireless security camera system, with a motion detection range of approximately 6 - 20 feet (2m to 6m). Learn more about the Blink Solar Panel Mount.
Note: The Blink Solar Panel Mount is only compatible with the Outdoor (3rd Gen).