Mounting Your Blink Outdoor and Indoor (3rd Gen) Camera

Use this article for tips on how to securely mount your Blink Outdoor or Indoor (3rd Gen) wireless camera.

Included accessories

Your Blink Outdoor and Indoor (3rd Gen) camera comes with the following accesories:

  • A back cover opening tool/right angle adapter
  • A cone-shaped swivel mount matching the color of your camera body
  • Two screws for the mount

camera mounts and screws

Find the perfect spot

The best motion detection occurs when movement goes across the field of view. Motion directly toward or away from the camera can be harder to detect. Camera placement helps your camera settings be most effective.

You can verify the camera view and check placement by holding your camera in the desired location, and use the Blink app to refresh the camera thumbnail, or enter Live View. Once you've determined the perfect spot, mark your spot with a pencil or a piece of masking tape.

When you have determined the best location for your camera, secure the mount to a surface with the provided screws. 

Note: The mount and screws are non-corrosive, but if you're mounting outside, some moisture buildup may occur underneath the mount base.

Vertical mounting

In vertical mounting locations such as a wall or post, the camera can connect directly to the volcano mount. The camera opening snaps directly onto the mount as shown in the image.

mounting options

Horizontal mounting

In horizontal locations such as a ceiling or shelf, use the right angle adapter. This adapter snaps into the opening on the back of the camera, as shown with dashed lines below. Remove the silicone disc if it is present, to access the mount opening.

mounting options

Press the adapter onto the connecting point of the mount. The adapter will snap into place indicating a secure attachment. 

press the adapter to the mount 3 main mounting options

Depending on where your camera is placed, it may be helpful to attach the adapter to the camera before attaching both to the mount.

After mounting

Once your camera is properly mounted, go back into the Blink app, create a thumbnail  or enter Live View  to confirm your camera is correctly viewing the area or needs to be adjusted. You can tilt and rotate the mounted camera by gently moving it with your hand to get the perfect viewing angle.

 

Mounts and other accessories are found at amazon.com.


Learn more

Understanding placement of your Blink Cameras

Understanding Motion Detection




Can’t find what you’re looking for?

Contact Support