Can I Disable the Blue Recording LED on the Camera?

Blink cameras have an activity indicator in the form of a blue color LED light on the front of the camera.

For all cameras other than the Indoor, the blue light can be turned off.

Blink XT and XT2, have a physical hardware switch inside the camera to control whether the status light is on or off.

For the Blink Indoor, Outdoor and Mini, the Status LED is controlled in camera settings.

Applies to XT and XT2 cameras only

The XT and XT2 cameras have a hardware switch inside the battery compartment  to control the blue recording light.  This feature is not available on the Blink indoor cameras.

This article will show you how to turn off the blue recording LED on Blink XT. This LED is enabled by default from the factory.

1. Remove the battery cover. To see how to do that, click here.
2. To the right of your camera's serial number, you'll see a switch that says "REC. LED" with two positions, "ON" and "OFF".

REC. LED switch

3. Using tweezers or a similar tool, slide that switch to the off position (toward the top of the camera).

slide switch to the off position

Blink Mini

For the Blink Mini camera, there is a switch in the Blink app, on the camera settings screen, named Status LED. The Status LED can be set to the following:

  • On - Displays a green light on the front of the Mini camera when it is active and ready to use, then shows a blue light while recording.
  • Off - Never display the Status LED.
  • Recording - Displays a blue light while recording.

Blink Indoor and Outdoor

For the Blink Indoor and Outdoor cameras, there is also a switch in the Blink app on the camera settings screen, named Status LED. The Status LED can be set to the following:

  • Off - Never display the Status LED.
  • Recording - Displays a blue light while recording.

For more details about camera settings, please visit the article here.



Can’t find what you’re looking for?

Contact Support