Changing the Chime Volume on Your Blink Video Doorbell

This article describes how to adjust the chime volume for your Video Doorbell and your in-home chimes. 

Changing the volume of the Video Doorbell

By default, the doorbell plays a chime sound through its internal speaker when the ringer button is pressed. To change the volume of this chime, follow these steps.

  1. On your doorbell's thumbnail, tap More and select Device Settings.
  2. Tap Audio Settings.
  3. Adjust the slider under Dingtone Volume to your preferred volume.
  4. Press Save.

Changing the volume of your in-home chime

When wired to your existing chime wiring, the doorbell can activate your existing in-home chime with doorbell button presses. You can change the strength of the mechanical or digital chime sound in the Blink app by following these steps.

  1. On your doorbell's thumbnail, tap More and select Device Settings.
  2. Tap Doorbell and Chime Settings.
  3. Tap Test Sound and you'll be prompted to acknowledge the chime test.
    • If you select Yes, Chime Sounds Good, the next screen is the power analysis for the chime.
    • If you select No, Sounds Too Soft Or Incomplete, a level selector displays allowing you to set your preference. We recommend changing two units at a time.
  4. Next, a Power Analysis checks the compatibility of your chime wiring to your the Video Doorbell. A successful Power Analysis displays a green check mark. Tap Continue.
  5. Tap Done to return to the home screen. 

Can’t find what you’re looking for?

Contact Support