My Mini cameras aren't turning on

If your Mini cameras aren't turning on: 

• Ensure the power cable is properly plugged in.
• Verify that the power socket is working.
• Check for any visible damage to the power cable.
• Confirm that both cameras are properly connected to the mount's power cables.

How do I reset my mounted Mini cameras?

To reset a Mini camera that’s attached to a mount:

1. While keeping the camera connected and turned on, carefully push the camera forward from the rear of the mount until it has been released. 
   
2. Press and hold the reset button on the bottom of the camera for 5 seconds.
   
3. Slide the camera back into the front of the mount, facing forward.
   
4. Verify all power connections are secure.

For more details about resetting your Mini cameras, visit:

• Blink Mini 2 Reset Button.
• Blink Mini 2K+ Troubleshooting.

My cameras aren't aligning for 180° view

For proper 180° view alignment:

• Ensure both cameras are the same model type (don't mix Mini 2K+ with Mini 2).
• Verify that the Mini cameras are firmly placed in the mount.
• Confirm that you're using compatible models (Mini 2K+ or Mini 2 only).

Important: Other Blink camera models aren’t compatible with this mount.

The Panoramic Live View feature isn't working in my Blink app

Panoramic Live View requires an active Blink Plus Subscription Plan or no-cost trial and compatible Mini cameras properly paired to your Blink system.

To verify your subscription status:

1. From the Home screen, tap Settings. 
2. Tap Blink Subscription Plans.
3. Confirm you have an active Blink Plus Plan Subscription or no-cost trial.

If you don't have an active subscription, visit Blink Subscription Plus Plan to sign up. 

Why are my images out of sync or lagging between camera views?

If you notice lagging images or delays while using Panoramic Live View, this could be caused by mismatched video quality settings.

To ensure both Mini cameras use matching video quality settings:

1. Open the Blink app and tap the More (...) button on the camera thumbnail from the Home screen.
2. Tap Device Settings.
3. Select Video and Photo Settings.
4. Tap Video Quality and select your minimum upload speed for each resolution:
   • Best quality (2K): 6 Mbps of upload speed.
   • Standard quality (1080p): 3 Mbps of upload speed.
   • Saver quality (720p): 2 Mbps of upload speed.
5. Tap Save to apply changes (if applicable). 
6. Repeat these steps for each Mini camera. 

If sync issues persist: 

• Lower the resolution for both Mini cameras to the same setting.
• Verify the signal strength for each camera:

1. Open the Blink app and tap the More (...) button on the camera thumbnail from the Home screen.
2. Tap Device Settings.
3. Tap General Settings.
4. Verify there is a strong connection to Wi-Fi.

• Position your Mini cameras closer to your router.
• Remove obstructions between the Mini cameras and your router.

For additional assistance, visit:

• Mini Wi-Fi Connection Issues.
• Blink Mini 2K+ Troubleshooting.

How to fix poor connectivity issues

If you receive a poor connectivity alert, verify these network requirements:

Wi-Fi network

• Must be 2.4 GHz Wi-Fi network (802.11 b/g/n).
• Security protocols: WPA, WPA2 with TKIP SSID, or WPA3.

Internet speed

High-speed internet with minimum upload speed for each resolution:

• Best quality (2K): 6 Mbps of upload speed.
• Standard quality (1080p): 3 Mbps of upload speed.
• Saver quality (720p): 2 Mbps of upload speed.

Signal strength

To enhance signal strength:

• Position your camera closer to the router when possible.
• Try extending your Wi-Fi range.
• Remove any obstructions between the camera and router.
• Avoid placing the camera near metal objects or electrical equipment.

For complete system requirements and additional troubleshooting, visit Blink System Requirements.